Environment Auditing
- Indoor Air Quality auditing & monitoring solutions
- Out Door Air Quality auditing & monitoring solutions
- Carbon Emission Auditing & monitoring Solutions
INDOOR AIR QUALITY MONITOR
GET evaluates Humidity, Air Exchange Rate, O2, CO2 in indoor environmental quality for non-industrial workplaces such as offices, schools and hospitals. Poor indoor air quality can have a significant negative impact on the comfort and health of occupants, resulting in increased building operating costs and loss of productivity.
We perform Quantitative Assessment for Indoor Environment Quality as per ASHRAE / OSHA / NIOSH / LEED Green Building standards:
NOx, SOx, CO, HC, PM10, PM2.5, NH3, Oxygen, TVOC, Formaldehyde, Microbial contamination, Thermal Comfort, Ventilation Rate, CO2.
OUTDOOR AIR QUALITY MONITOR
GET offers innovative solutions to environmental challenges and continual improvement to routine methodologies. We are equipped with state-of-the-art-equipment and cutting-edge technologies. Our philosophy is to work with our clients to meet regulatory commitments, identify process improvements and optimize processes. Emission testing for air contaminants is commonly performed to verify compliance with CPCB/SPCB and National Ambient Air Quality Standards (NAAQS) Guidelines.
GET analyses certain other parameters to evaluate the air contaminants.
- NAAQS – PM10, PM2.5, SO2, NOx, CO, Ozone, Ammonia, Benzene
- Arsenic, Lead, Nickel.
- Heavy Metals including Mercury
- Volatile Organic Compounds
- Carbon Content (Organic & Elemental Carbon)
- Semi-volatile Organics (PAHs )
- Sulphur Compound Gases (H2S, CS2)
- Fluoride & HF
- Non-Methane Hydro Carbons
CARBON EMISSION MONITORING SYSTEM
GET core capabilities lies in reliable emission sampling and analysis as per standards for all emissions such as Flue Gas, Process Emissions, Emissions from Boilers, Scrubbers, Furnace, Paint Booth, Oven Ducts, Incinerators and DG Sets and Efficiency check of all APCM’s (Air Pollution Control Measures) for the following parameters. We have expertise in Emission monitoring for compliance, performance testing and Process optimisation testing for various parameters.
- Velocity, Emission Rate, Temperature and Pressure
- Particulate Matter
- Combustion Products (CO, SO2, NOx)
- Heavy Metals including Mercury
- Dioxins and Furans
- Semi-volatile Organics (PAHs & PCBs)
- Acid Gases (HCl, HF, H2SO4)
- Sulphur Compound Gases (H2S, CS2, SO2)
- Volatile Organic Compounds
- Halogen (Cl2, F2, Br2and I2)
- Ammonia
DUSTGUARD PARTICULATE MONITOR PM-250
Process Trend Monitor and Multi-Purpose Dust Alarm with display A real-time continuous indicative dust monitor with logging & alarm capability. Low-cost solution to monitoring requirements.
- Quick & easy single point installation with no moving parts.
- Low capital & maintenance costs.
- High Sensitivity.
- Can be calibrated to show emission levels in mg / m3.
- Adjustable range from 1-1,000 mg/m3.
- Minimum detection limit less than 1 mg/m3.
The Stack Guard series operate on the principle of Tribo – Electric charge transfer. The electrical charge carried by dust particles is captured by a highly sensitive Tribo – Electric probe, amplified and then transmitted to the control unit. As the current generated by the charge is proportional to the concentration of particles present, an indicative signal of dust presence results.
Stack Guard is most suitable for use in Low Humidity gas streams with reasonably constant flows. The Control unit is mains powered, & incorporates alphanumeric display with Adjustable alarm levels.
1. Dust levels at which the red LED light, an alarm is triggered
2. The emissions level at which the audible and visual alarm is triggered